Corners, Connectors, Ears, and Pins for Overheads Frames

$ 37.00

Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go.

PN 409001 - Corner for 1" Round Tube - 1.5lbs
PN 409105-1 - Corner for 1" Square Frame - 2lbs
PN 409500-1 - Corner for 1/4" Square Tube - 2.25lbs
PN 409003 - Hollywood Corners, Set of 4* - 8lbs
PN 409200 - QUIK Corners, Set of 4 - 2lbs
PN 319640 - Corner for 1-1/4" Pipe - 2lbs
PN 319647 - Corner for 1-1/2" Pipe - 2.25lbs
PN 319551 - Connector for 1" Square Tube - 2lbs
PN 319550 - Connector for 1-1/4" Pipe - 2lbs
PN 319552 - Connector for 1-1/2" Pipe - 2.25lbs
PN B429616 - Hollywood Hangar for 1" Round Tube and 1-1/4" Pipe, Black - 4lbs
PN 409000 - Pin for 1" Round Tube - 2lbs
PN 409209 - QUIK Reverse 5/8" Pin for 1" Square Tube, Black - 2.5lbs
PN 309500-3 - Ear for 1-1/4" Square Tube - 2.25lbs
PN 319651 - Ear for 1-1/4" Pipe - 4lbs
PN 319642 - Ear for 1-1/2" Pipe - 5lbs
PN 409525 - Backdrop Ear w/1-1/4" Pipe Connector, Black - 2lbs
PN 409526 - Backdrop Ear w/1-1/2" Pipe, Black - 2lbs
PN 409527 - Backdrop Ear for 1" Speed Rail, Black - 2lbs
PN 409216 - Backdrop Ear w/Square QUIK Reverse Ear, Black - 2lbs
PN 319654 - Double Ear: 1"-1.25" Square Tube

*Each Hollywood Corner is gusseted for maximum strength. There is no need for cumbersome tie straps. The corners contain all tubes in a captive state with no more loose pieces that could be lost or damaged.

Matthews 'Quick Reverse Ears' are the strongest, most versatile way of suspending an overhead frame and they are available only from Matthews. The ears are guaranteed to provide a fast and efficient way to flip the frame, allowing two rags to be tied off to the frame, one on either side. Flip from bounce to black or any other combination.

Backdrop Ears(TM): Well, Matthews has the solution that permanently eliminates the wrinkling problem associated with the standard style ears - Matthews Backdrop Ears. By extending the 409525 Backdrop Ear Round Connector and the 409216 Backdrop Ear Square QUIK Reverse Pin away from the Grip Head through a series of extensions and well-designed bends, Matthews has achieved what was virtually impossible to accomplish using the older style ears when hanging lighting control fabrics. Backdrop Ears are available in black only but come in two styles - square and round. Now, what are you going to do with all the time you just saved?

Backdrop Ears are patent pending.

Double Ears: Hang two parallel frames at a consistent 10" separation on all sides either vertically or horizontally on just two lighting stands. Double Ear was designed to simultaneously hold LED lighting panels or tubes and parallel diffusion, guaranteeing even light dispersion while offering easy repositioning. It also offers versatility in applications where more than one light modifier such as gels and diffusion are required on a light source. The Double Ear construction features offset bends for easy maneuvering, thick welded gussets for strength, and accepts 1" - 1.25" square tubing to accommodate standard European and American frames.

COMING SOON!
PN 409510-1 - Corner for 1-1/4" Square Frame
PN 319657 - Corner for 1-1/2" Pipe
PN 319653 - Corner for 1/14" Pipe

Matthews offers a wide variety of Corners, Connectors, Ears, and Pins to create your own Overhead Frame on the go.

PN 409001 - Corner for 1" Round Tube - 1.5lbs
PN 409105-1 - Corner for 1" Square Frame - 2lbs
PN 409500-1 - Corner for 1/4" Square Tube - 2.25lbs
PN 409003 - Hollywood Corners, Set of 4* - 8lbs
PN 409200 - QUIK Corners, Set of 4 - 2lbs
PN 319640 - Corner for 1-1/4" Pipe - 2lbs
PN 319647 - Corner for 1-1/2" Pipe - 2.25lbs
PN 319551 - Connector for 1" Square Tube - 2lbs
PN 319550 - Connector for 1-1/4" Pipe - 2lbs
PN 319552 - Connector for 1-1/2" Pipe - 2.25lbs
PN B429616 - Hollywood Hangar for 1" Round Tube and 1-1/4" Pipe, Black - 4lbs
PN 409000 - Pin for 1" Round Tube - 2lbs
PN 409209 - QUIK Reverse 5/8" Pin for 1" Square Tube, Black - 2.5lbs
PN 309500-3 - Ear for 1-1/4" Square Tube - 2.25lbs
PN 319651 - Ear for 1-1/4" Pipe - 4lbs
PN 319642 - Ear for 1-1/2" Pipe - 5lbs
PN 409525 - Backdrop Ear w/1-1/4" Pipe Connector, Black - 2lbs
PN 409526 - Backdrop Ear w/1-1/2" Pipe, Black - 2lbs
PN 409527 - Backdrop Ear for 1" Speed Rail, Black - 2lbs
PN 409216 - Backdrop Ear w/Square QUIK Reverse Ear, Black - 2lbs
PN 319654 - Double Ear: 1"-1.25" Square Tube

*Each Hollywood Corner is gusseted for maximum strength. There is no need for cumbersome tie straps. The corners contain all tubes in a captive state with no more loose pieces that could be lost or damaged.

Matthews 'Quick Reverse Ears' are the strongest, most versatile way of suspending an overhead frame and they are available only from Matthews. The ears are guaranteed to provide a fast and efficient way to flip the frame, allowing two rags to be tied off to the frame, one on either side. Flip from bounce to black or any other combination.

Backdrop Ears(TM): Well, Matthews has the solution that permanently eliminates the wrinkling problem associated with the standard style ears - Matthews Backdrop Ears. By extending the 409525 Backdrop Ear Round Connector and the 409216 Backdrop Ear Square QUIK Reverse Pin away from the Grip Head through a series of extensions and well-designed bends, Matthews has achieved what was virtually impossible to accomplish using the older style ears when hanging lighting control fabrics. Backdrop Ears are available in black only but come in two styles - square and round. Now, what are you going to do with all the time you just saved?

Backdrop Ears are patent pending.

Double Ears: Hang two parallel frames at a consistent 10" separation on all sides either vertically or horizontally on just two lighting stands. Double Ear was designed to simultaneously hold LED lighting panels or tubes and parallel diffusion, guaranteeing even light dispersion while offering easy repositioning. It also offers versatility in applications where more than one light modifier such as gels and diffusion are required on a light source. The Double Ear construction features offset bends for easy maneuvering, thick welded gussets for strength, and accepts 1" - 1.25" square tubing to accommodate standard European and American frames.

COMING SOON!
PN 409510-1 - Corner for 1-1/4" Square Frame
PN 319657 - Corner for 1-1/2" Pipe
PN 319653 - Corner for 1/14" Pipe

Related Products